TOLL FREE  888-869-2424 (U. S. A. ONLY)
OUTSIDE U. S. A. (281) 664-1020

KURT VISES

MOVELOCK MODULAR SYSTEM

 

This high precision two-piece vise is the first of its type to utilize the famous Kurt Anglock concept to prevent jaw lift during clamping. As power is applied to the piston, it is driven forward to locate on an internal segment. While the lateral force is clamping the part, downward pressure is being applied to the movable jaw, which minimizes or prevents part lift. For every pound of clamping force on the jaw, there is a half pound of force exerted down on the movable jaw.

Features:
  • Movable and stationary jaws sold separately.
  • Movable jaws are available in either manual or hydraulic actuation.
  • May be used as a single or double station vise, and can be mounted side by side.
  • Can be configured into high density fixturing.
  • Features a 5/16" stroke.
  • Mounts on a 2" x 2" grid system, T-slot sub-bases with a 2" pitch, standard sub-plates and machine tables and SeraLock system.
  • Clamps large workpieces - jaw opening limited only by the work envelope.
  • Light weight.
  • Small footprint - 3.500" jaw width.

Special jaw plates and workstops are available. Contact the factory for pricing and availability.
ML_2.TIF  ML_2.TIF
MLH35 Hydraulic Pressure
Torque/Clamping Force Chart
Hyd. Pressure
(PSI) 		Clamping Force
(LBS)
400 200
800 500
1200 850
1600 1200
2000 1550
2400 1850
2800 2150
3200 2500
ML35 Torque/Clamping Force Chart
Torque
(FT LBS) 		Clamping Force (LBS)
05 750
10 1550
15 2600
20 3550
25 4450
30 5400
35 6300
40 6900

Stationary Jaw MLS351
Serrated Stationary Jaw SMLS351

Manual Movable Jaw ML35
Serrated Manual Movable Jaw SML35


Hydraulic Movable Jaw MLH35
Serrated Hydraulic Movable Jaw SMLH35



VISE JAWS

HOME