TOLL FREE  888-869-2424 (U. S. A. ONLY)
OUTSIDE U. S. A. (281) 664-1020

KURT VISES

D810  8"  VISE

The original Kurt Anglock D-Series vises are designed for precision part clamping on basic machine tools such as knee-type mills, grinders and machining centers. D-Series vises are ideal for use in running production parts where datums, flatness and parallelism is important. You can precision bore, tap, drill, grind and finish with high accuracy on most parts made of die cast aluminum, steel, and iron in your Kurt Anglock vises. No other brand can give you the time proven accuracy of the Kurt Anglock vises.

All Kurt vises have a friction reducing, needle bearing, thrust collar. The needle bearing increases jaw clamping pressure.

D688_03.TIFD810 – New, Easier Operation

Kurt’s new D810 features a new updated body style:

  • Top down, four bolt design on the stationary jaw reduces vise deflection by 25 percent while allowing total disassembly of the vise without removing the body from the machine table. Special brush seals shield and protect vise screw threads from machined chips and residue.
  • The nut has been shortened so as not to protrude past the end of the vise body. New powder coat paint finish resists coolant-induced peeling for greater corrosion protection. The overall vise footprint is identical to earlier models so both can be used interchangeably and in tandem.
  • With a jaw opening of 10 inches and clamping force up to 11,600 lbs., the D810 vise locks parts precisely including very large parts for aggressive “hogging out” operations.

Features of All D-Series Vises Include:
  • AngLock design assures the movable jaw does not lift.
  • Hardened vise bed.
  • Hardened jaw plates.
  • Semi-hard steel screw.
  • 80,000-PSI ductile iron body.
  • Matching of bed height ±0.001" available at
    an additional cost for the D40 and D100 vises.
  • Matching of the keyway to the stationary jaw ±0.001" is available at additional cost.
  • Some models available in metric version.

Repair Kits

Model

 Repair Kit
D30 *D30-KIT
D40 *D40-KIT
D50 *D50-KIT
D60 D60-KIT
D675 *D675-KIT
D688 *D688-KIT
D80 D80-KIT
D810 *D810-KIT
D100 D100-KIT
*= Same as Metric Vise
DIMENSIONAL DATA
  D40 D675 D688 D810 D100
A 2.250 2.875 2.875 3.310 3.875
B 4.000 6.000 6.000 8.000 10.000
C 12.340 16.750 16.810 21.810 27.500
D 2.562 3.562 3.562 4.686 5.875
E 0.500 0.688 0.688 0.813 0.813
F 1.115 1.485 1.485 1.965 2.465
G 1.355 1.980 1.980 3.652 2.950
H 1.235 1.735 1.735 2.200 2.937
J 0.547 0.725 0.725 1.075 1.320
K 4.000 4.800 4.800 6.190 8.630
L 1.281 1.540 1.540 1.865 2.225
M - 1.390 - - -
N 0.687 0.940 0.940 1.220 1.625
O 2.500 3.875 3.875 4.750 5.750
P 3/8-16 1/2-13 1/2-13 5/8-11 3/4-10
Q 6.380 8.750 8.750 11.500 14.500
R 5.750 8.250 8.250 11.000 13.250
S 2.625 3.813 3.813 4.940 6.188
T 4.860 6.710 5.667 8.500 10.590
U 0.531 0.656 0.656 0.880 0.940
V 0.700 2.000 1.930 2.375 1.690
W 9/16 0.750 0.750 0.875 1
AA 3-7/8 7.5 8.8 10 9-3/4
AA MIN 0 0 0 0 0
BB 5.750 10.500 11.500 14.730 14.000
BB MIN 1.400 3.000 2.700 4.730 3.500
CC 8.4375 13.125 14.320 17.260 19.750
CC MIN 4.100 5.800 5.600 7.260 9.200
DD 10.3125 15.875 17.030 21.990 24.750
DD MIN 5.900 8.500 6.800 11.990 13.500
Ship Wt. 32 78 78 158 300
MANUAL VISE CLAMPING FORCE-LBS.
Torque Ft.-Lbs. D40 D675 D688 D810 D100
10 1653 989 1129 - -
20 2923 1776 2242 1834 1698
30 4103 2848 3337 - -
40 5241 3628 4148 3843 3300
50 6513 4365 5379 - -
60 7807 5432 6310 4349 4686
70 - 6111 6977 - -
80 - 6721 7968 5706 6623
100 - - - 7042 7842
120 - - - 8688 9970
140 - - - 10413 11429
160 - - - 11596 12792
180 - - - - 14681
200 - - - - 16163
220 - - - - 18124
240 - - - - 20563
260 - - - - 22093
280 - - - - 24077
300 - - - - 26277
 

KURT VISE CHOICE INDEX
HOME