| The original Kurt Anglock D-Series vises are designed for
precision part clamping on basic machine tools such as knee-type
mills, grinders and machining centers. D-Series vises are ideal for
use in running production parts where datums, flatness and
parallelism is important. You can precision bore, tap, drill, grind
and finish with high accuracy on most parts made of die cast
aluminum, steel, and iron in your Kurt Anglock vises. No other brand
can give you the time proven accuracy of the Kurt Anglock vises.
All Kurt vises have a friction reducing, needle bearing, thrust
collar. The needle bearing increases jaw clamping pressure.
|
D40
The D40 vise is recommended for intermediate milling and
grinding work. It is an ideal vise for use in matched
multiples for holding long parts. With jaw plates in their
outside positions, this 4 inch vise has a capacity of
10-5/16 inches.
|
|
Features of All
D-Series Vises Include: |
- AngLock design assures the
movable jaw does not lift.
- Hardened vise bed.
- Hardened jaw plates.
- Semi-hard steel screw.
- 80,000-PSI ductile iron
body.
|
- Matching of bed height
±0.001" available at
an additional cost for the D40
and D100 vises.
- Matching of the keyway to
the stationary jaw ±0.001" is
available at additional cost.
- Some models available in
metric version.
|
|
|
  
|
Repair Kits
|
|
Model |
Repair Kit |
| D30 |
*D30-KIT |
| D40 |
*D40-KIT |
| D50 |
*D50-KIT |
| D60 |
D60-KIT |
| D675 |
*D675-KIT |
| D688 |
*D688-KIT |
| D80 |
D80-KIT |
| D810 |
*D810-KIT |
| D100 |
D100-KIT |
| *= Same as Metric
Vise |
|
|
DIMENSIONAL DATA |
| |
D40 |
D675 |
D688 |
D810 |
D100 |
| A |
2.250 |
2.875 |
2.875 |
3.310 |
3.875 |
| B |
4.000 |
6.000 |
6.000 |
8.000 |
10.000 |
| C |
12.340 |
16.750 |
16.810 |
21.810 |
27.500 |
| D |
2.562 |
3.562 |
3.562 |
4.686 |
5.875 |
| E |
0.500 |
0.688 |
0.688 |
0.813 |
0.813 |
| F |
1.115 |
1.485 |
1.485 |
1.965 |
2.465 |
| G |
1.355 |
1.980 |
1.980 |
3.652 |
2.950 |
| H |
1.235 |
1.735 |
1.735 |
2.200 |
2.937 |
| J |
0.547 |
0.725 |
0.725 |
1.075 |
1.320 |
| K |
4.000 |
4.800 |
4.800 |
6.190 |
8.630 |
| L |
1.281 |
1.540 |
1.540 |
1.865 |
2.225 |
| M |
- |
1.390 |
- |
- |
- |
| N |
0.687 |
0.940 |
0.940 |
1.220 |
1.625 |
| O |
2.500 |
3.875 |
3.875 |
4.750 |
5.750 |
| P |
3/8-16 |
1/2-13 |
1/2-13 |
5/8-11 |
3/4-10 |
| Q |
6.380 |
8.750 |
8.750 |
11.500 |
14.500 |
| R |
5.750 |
8.250 |
8.250 |
11.000 |
13.250 |
| S |
2.625 |
3.813 |
3.813 |
4.940 |
6.188 |
| T |
4.860 |
6.710 |
5.667 |
8.500 |
10.590 |
| U |
0.531 |
0.656 |
0.656 |
0.880 |
0.940 |
| V |
0.700 |
2.000 |
1.930 |
2.375 |
1.690 |
| W |
9/16 |
0.750 |
0.750 |
0.875 |
1 |
| AA |
3-7/8 |
7.5 |
8.8 |
10 |
9-3/4 |
| AA MIN |
0 |
0 |
0 |
0 |
0 |
| BB |
5.750 |
10.500 |
11.500 |
14.730 |
14.000 |
| BB MIN |
1.400 |
3.000 |
2.700 |
4.730 |
3.500 |
| CC |
8.4375 |
13.125 |
14.320 |
17.260 |
19.750 |
| CC MIN |
4.100 |
5.800 |
5.600 |
7.260 |
9.200 |
| DD |
10.3125 |
15.875 |
17.030 |
21.990 |
24.750 |
| DD MIN |
5.900 |
8.500 |
6.800 |
11.990 |
13.500 |
| Ship Wt. |
32 |
78 |
78 |
158 |
300 |
|
|
MANUAL VISE CLAMPING FORCE-LBS. |
| Torque Ft.-Lbs. |
D40 |
D675 |
D688 |
D810 |
D100 |
| 10 |
1653 |
989 |
1129 |
- |
- |
| 20 |
2923 |
1776 |
2242 |
1834 |
1698 |
| 30 |
4103 |
2848 |
3337 |
- |
- |
| 40 |
5241 |
3628 |
4148 |
3843 |
3300 |
| 50 |
6513 |
4365 |
5379 |
- |
- |
| 60 |
7807 |
5432 |
6310 |
4349 |
4686 |
| 70 |
- |
6111 |
6977 |
- |
- |
| 80 |
- |
6721 |
7968 |
5706 |
6623 |
| 100 |
- |
- |
- |
7042 |
7842 |
| 120 |
- |
- |
- |
8688 |
9970 |
| 140 |
- |
- |
- |
10413 |
11429 |
| 160 |
- |
- |
- |
11596 |
12792 |
| 180 |
- |
- |
- |
- |
14681 |
| 200 |
- |
- |
- |
- |
16163 |
| 220 |
- |
- |
- |
- |
18124 |
| 240 |
- |
- |
- |
- |
20563 |
| 260 |
- |
- |
- |
- |
22093 |
| 280 |
- |
- |
- |
- |
24077 |
| 300 |
- |
- |
- |
- |
26277 |
|
|
|
|
